Can you fix a forklift hydraulic hose at our dock in Neenah without us moving the truck?

Yes. Forklift mast and tilt hoses are made on our truck and fitted in your lot or on the dock. The lift needs to be lowered and blocked, then most swaps take under an hour.

How fast can you get to a plant on Commercial Street or off I-41?

Neenah is in our inner ring. Daytime calls usually see the truck within the hour, and the service call is our lowest rate, $75 to $125.

Do you handle metric fittings on European lift trucks?

We carry DIN and metric adapters alongside JIC and ORFS. If a fitting is something unusual we say so on the phone and bring the right ends rather than guess.

Can we set up a standing account for the whole fleet?

Yes. Fleet accounts get a preseason inspection with a written replace list per machine, priced from the same public table as everyone else.

Service area · 54956, 54957

Hydraulic hose and line repair in Neenah, Wisconsin

Densest industrial forklift and yard equipment base in the metro: foundry, paper and contract manufacturing plants on the Fox River, ten minutes up I-41 from Oshkosh.

Call (920) 521-8455

Oshkosh Hydraulic Line Repair is the Oshkosh based mobile hydraulic service, and Neenah is a regular stop on the route, on the schedule every week.

Neenah runs on lift trucks. Between the foundry, the paper converting plants and the contract electronics shops along Commercial Street and the I-41 frontage, there are more forklifts, yard tractors and scissor lifts per square mile here than anywhere else we cover. A lift cylinder that drifts or a tilt hose weeping onto the dock floor is the kind of call we get from Neenah most weeks.

The fix is usually made on the truck in your lot. We measure the failed hose, crimp a new one with the same ends, and swap it while the machine sits on the dock. For forklift mast hoses that run inside the mast channel we bring the longer lengths and the sleeve material so the new hose does not chafe through in six months.

Neenah is inside our first ring, so the service call is the lowest we charge and the truck is typically there within the hour during the day. Foundry and mill maintenance crews can also book a preseason walk through of their whole fleet so the worst hoses get changed on a schedule instead of on a Friday afternoon.

What Neenah plant crews ask for

Plant maintenance leads in Neenah usually want an invoice per machine number, not per visit. Tell us on the call and the paperwork comes that way.

Where the truck goes in Neenah

We cover all of Neenah (54956, 54957) including I-41 and Winneconne Avenue, the Fox River locks at Doty Island, the Commercial Street industrial corridor and Neenah Foundry. The same truck runs Fond du Lac, Omro and Kaukauna, and what it carries is on the hose repair, hard line and cylinder pages.

Getting a number before the truck rolls

Every Neenah call is priced from the table on the pricing page: the service call for your ring, then the hose, line or cylinder from its row. Down after hours with a deadline? The emergency terms are published too, so the number on the phone is the number on the invoice.

Neenah questions we hear on the phone

Can you fix a forklift hydraulic hose at our dock in Neenah without us moving the truck?: Yes. Forklift mast and tilt hoses are made on our truck and fitted in your lot or on the dock. The lift needs to be lowered and blocked, then most swaps take under an hour.
How fast can you get to a plant on Commercial Street or off I-41?: Neenah is in our inner ring. Daytime calls usually see the truck within the hour, and the service call is our lowest rate, $75 to $125.
Do you handle metric fittings on European lift trucks?: We carry DIN and metric adapters alongside JIC and ORFS. If a fitting is something unusual we say so on the phone and bring the right ends rather than guess.
Can we set up a standing account for the whole fleet?: Yes. Fleet accounts get a preseason inspection with a written replace list per machine, priced from the same public table as everyone else.